843.610.5093 sales@peltecndt.com
Select Page

Peltec Remote Safety Operational Controller

Peltec Remote Safety Operational Controller

The highly stabilized generating device produces a consistent 25Khz output with low ripple/noise rate which delivers a more constant beam which produces a better image on CR, DR and Film median.

The system also features an electric tube positional which allows the end-user to adjust the tube height to desired position. The adjustable tube is capable of achieving a maximum height of 104 inches down to 20 inches. The tube holder also has the capabilities to rotate the tube 180 degrees for angle shots. The system can operate is a vertical or horizontal beam direction.

Peltec X-series product also incorporate a full compliancearea alarm package that is required for vault operation.

The Peltec X-series also has a comprehensive fault diagnostic circuitry and Arc sense devices which protects the system from tube arcs.

External Chiller for cooling the oil in X-ray tube. The Chiller features quick lock connectors.

  • Peltec 1600 X-series Industrial X-ray compact system package was designed for vault use for the NDT Industry.
  • The unit is designed to produce 160 KV with a max output of 4500 watts.
  • The unit integrates a solid state power supply that is oil and gas free.

Input Voltage: 180—164Vac, 47-63 hertz, power factor corrected input to ≥ 0.98

Input Current: <25 amps

Output polarity: Bipolar

Output current: 0-30ma

Output Voltage:

Load: ± 0.05% of rated ouput voltage for a
full load charge

Line: ± 0.05% of rated output volatge over
specified input range

Ripple(P-P): < 0.1%

Accuracy: 0.25%

Stability: ≤ 0.1% per 8 hours, after 1 hour warm up

Temperature Coefficient: 50ppm/°C

Emission Current:

Load: ±0.05% of ratted output current for a change from 30% to 100% of rated

Output volatge:

Line: ± 0.05% of rated current over specified input voltage range

Accuracy: 0.25%

Stability: 100ppm/°C

Filament:

Output: 0-6 amps at a compliance of
10Vdc, Maximum

Dual Focal Spot: Small and large, selectable via interface signal

Configuration: DC filament drive. Closed loop emission control regulates filament setting to provide desired x-ray tube emission current

Control Interface: System can be operated with a hardware controller or via computer.

Hardware Controller:

Remote Interface: Ethernet utilizing a VB GUI

Operating Temperature: 0°C to 50°C

Storage Teperature: -40°C to +85°C

Humidity: 20% to 85% RH, non-condensing

Cooling Power supply: Forced Air

Cooling tube supply: Industrial oil chiller

Cross Hair Laser Pointer

Download Icon

Peltec Remote Safety Operational Controller

 
 

The Peltec Remote Safety Operational Controller is designed for use in the following industries:

  • Automotive
  • Transportation
  • Aviation
  • Aerospace
  • Fabrication

No product videos available.

Want More Info on the Peltec Remote Safety Operational Controller?

Get in touch with us to learn more about the Peltec Remote Safety Operational Controller or any of our other products.

Equipment

Review our industrial NDT X-ray equipment product lines. We manufacture our own X-series line of products and we’re also an authorized dealer for many top quality manufacturers such as Carestream, VisiConsult and Danatronics.

Services

Peltec Services provides a variety of Field Services on an as needed and service contract basis. We strive for 100% customer satisfaction and go to great lengths to provide cost effective, best in class service.

Supplies

Peltec Services is ready to provide you with a variety of industrial X-ray equipment supplies on an as needed or recurring basis. We are committed to making sure you always have what you need.

Global Headquarters

843.610.5093

2028 South Main St. BLDG A,
Darlington, South Carolina

sales@peltecndt.com

More than 60 years experience in NDT X-ray Solutions.