Peltec Lorad X-stand

Peltec Lorad X-stand

Peltec Lorad X-stand industrial X-ray compact systems package was designed for vault or open use for the NDT industry. The unit is designed to work with any Lorad 160KV or 200KV portable X-ray system. The system also features an electric tube positional which allows the end-user to adjust the tube height to a desired position. The adjustable stand is capable of achieving a maximum FOD height of 125 inches down to 30 Inches to floor. The tube holder also has the capabilities to rotate the tube 180 degrees for angle shots. The system can operate in a vertical or horizontal beam direction. The X-stand has four eight inch independent locking wheel system. The stand can be easily moved in all directions with the comfort grip bar. The Peltec Lorad X-stand product also incorporates a full 12 VDC battery package that makes the X- stand a true portable system that allows quicker set up times. The unit includes a smart built in battery charger that can be plugged into any standard 110 VAC outlet. Peltec Lorad X-stands are compatible to work with all Lorad LPX and SPX systems. Each unit is universal to house optional water cooler or air models for both LPX and SPX models.

Input Voltage:

110 to 120 Vac for recharging Battery

MOBILE XSTAND UTILIZING LORAD 160KV OR 200KV AIR OR WATER COOLED SYSTEMS.

POWER DRIVEN X-RAY TUBE POSITIONAL WITH UP AND DOWN AXIS AND EXTEND AXIS.

X-RAY SYSTEM CAN BE USE ON STAND OR OFF STAND

12 VOLT BATTERY POWERED SYSTEM ALLOWS EASY SETUP.

INDUSTRIAL DESIGNED FOR THE NDT MARKET.

• Motorized Tube position axis reaching 125 inches down to 30 inches
• 12 Volt DC battery with built in charging electronics.
• Power driven up and down axis with a power driven 24 inch extension arm.

All wheels can be locked in place.

Max Height 125”

Min Height 30”

DC Volt meter on electrical panel.