Peltec 3200 X-Series
The highly stabilized generating device produces a consistent 25Khz output with low ripple/noise rate which delivers a more constant beam that produces a better image on CR, DR and Film median.
The system also features an electric tube positional which allows the end-user to adjust the tube height to a desired position. The adjustable tube is capable of achieving a maximum height of 104 inches down to 16 inches. The tube holder also has the capabilities to rotate the tube 180 degrees for angle shots. The system can operate in a vertical or horizontal beam direction.
The Peltec X-series product also incorporates a full compliance area alarm package that is required for vault operation.
The Peltec X-series also has comprehensive fault diagnostic circuitry and Arc sense devices which protects the system from tube arcs.
External Chiller for cooling the oil in X-ray tube. The Chiller features quick lock connectors.
- Peltec 3200 X-series Industrial X-ray compact system package was designed for vault use for the NDT Industry.
- The unit is designed to produce 320 KV with a max output of 4200 watts.
- The unit integrates a solid state power supply that is oil and gas free.
Input Voltage: 180—264Vac, 47-63 hertz, power factor corrected input to ≥ 0.98
Input Current: <25 amps
Output polarity: Bipolar
Output current: 0-30ma
Output Voltage:
Load: ± 0.05% of rated ouput voltage for a
full load charge
Line: ± 0.05% of rated output volatge over
specified input range
Ripple(P-P): < 0.1%
Accuracy: 0.25%
Stability: ≤ 0.1% per 8 hours, after 1 hour warm up
Temperature Coefficient: 50ppm/°C
Emission Current:
Load: ±0.05% of rated output current for a change from 30% to 100% of rated
Output volatge:
Line: ± 0.05% of rated current over specified input voltage range
Accuracy: 0.25%
Stability: 100ppm/°C
Filament:
Output: 0-6 amps at a compliance of
10Vdc, Maximum
Dual Focal Spot: Small and large, selectable via interface signal
Configuration: DC filament drive. Closed loop emission control regulates filament setting to provide desired x-ray tube emission current
Control Interface: System can be operated with a hardware controller or via computer.
Hardware Controller:
Remote Interface: Ethernet utilizing a VB GUI
Operating Temperature: 0°C to 50°C
Storage Teperature: -40°C to +85°C
Humidity: 20% to 85% RH, non-condensing
Cooling Power supply: Forced Air
Cooling tube supply: Industrial oil chiller
Cross Hair Laser Pointer
The Peltec 3200 X-Series is designed for use in the following industries:
- Automotive
- Transportation
- Aviation
- Aerospace
- Fabrication
No product videos available.
Want More Info on the Peltec 3200 X-Series?
Get in touch with us to learn more about the Peltec 3200 X-Series or any of our other products.
Equipment & Imaging
Review our industrial NDT X-ray equipment & imaging product lines. We manufacture our own X-series line of products and we're also an authorized dealer for many top quality manufacturers such as Carestream, VisiConsult and Danatronics.
Services
Peltec Services provides a variety of Field Services on an as needed and service contract basis. We strive for 100% customer satisfaction and go to great lengths to provide cost effective, best in class service.
Supplies
Peltec Services is ready to provide you with a variety of industrial X-ray equipment supplies on an as needed or recurring basis. We are committed to making sure you always have what you need.
Global Headquarters

More than 60 years experience in NDT X-ray Solutions.